The MagnetoSpeed T1000 Hit Indicator is a GREAT addition to just about any of our targets being used for long range. You’ll really see it “shine” (see what we did there?) on larger targets like our MLS IPSC shaped targets. While these targets ring like a bell when impacted, sometimes you may have a hard time hearing it in high wind conditions. The MagnetoSpeed T1000 Target Hit Indicator takes out all the guess work of spotting hits on long range targets.
The T1000 is a rugged target hit indicator with a weatherproof enclosure and long battery life. It was designed to be mounted to the back side of steel targets 10 inches in width or greater. While mounted, it is in an always-on state waiting for the next shot. The flexible rubber reflector is designed to withstand many impacts before needing to be replaced. Target preparation for the T1000 is quick and simple and it is also easily transferable to multiple targets using common Industrial hook & loop tape. The T1000 has multiple operating modes to best suit your shooting situation and is easily seen through any optic that is capable of seeing the target at that shooting distance.
Includes the following:
- T1000 Unit (2x lithium AA batteries installed)
- Spare replacement reflector
- Spare set of mounting hook & loop straps
- Aiming tool
- Full Instructions
- Quick Start Instructions
PRO TIP – if you want the Velcro to stay on the back of the target F O R E V E R, heat the target plate up with a torch to about 150° and then add Gorilla Glue to the back of the loop piece of Velcro before applying. Use a pair of finger clamps and a 2×4 to hold the loop fastener in place. That baby isn’t ever coming off!